MATEST PRODUCTS
Address:
"Hellenic Petroleum" Building
274A, Tosin Bunar str.
New Belgrade
11070
Telephone:
+381112284574
H065, COLD BEND TESTING MACHINE
- Details
- Category: Steel
Standard:
ASTM A615-89, ASTM A615M-89 / D.M. 09.01.96 D.M. 14.01.08 / ISO 7438, 15630-1
Description:
This equipment has been studied and designed to carry out bend-ing tests on steel bars for reinforced concrete.
The test consists in bending the bar at 180° or to bend the same at 90° and then straighten if of at least 20°.
This bending machine is composed of a rugged frame supporting a beam having a cylinder with relevant load piston fixed on it, being activated by an hydraulic cell complete with speed adjuster for the piston, direction control valve, max. pressure valve, control gauge.
The whole is cased to protect every single component from the dust, and the operator from any possible danger.
A small bowl has been fitted under the beam, where the steel bar is bent.
Two contrasting rollers are fitted on the beam.
They may easily be adjusted in distance to be in accordance with the Standards concerning bars having diameter between 6 and 32 mm.
Fixing and changing the mandrels on top of the thrust cylinder is easy and practical and grants the operator a perfect interchange-ability of the same. A device prevents the unlocking of the bar under test from the relevant rollers and the contrasting mandrel both during the bending and the staightening operation.
The machine accepts bars up to Ø 32 mm. and is supplied complete with two series of rollers, having respectively Ø mm. 50 and 100. The mandrels, the mandrel-holders and the brackets are not included in the standard supply and have to be ordered separately. (see table).
- Max. piston load: 16.000 Kg
- Max. piston stroke: 550 mm
- Power supply: 400V 3F 50 Hz 1500W
- Dimensions: mm 1540x800xh 1300
- Weight: 350 Kg
| ccessories | ||
 | ||
| COD. | Description | |
| ||
| H068-01/H068-23 | BRACKET FROM DIA 5 MM TO DIA 40 MM | |
| H067-04 | MANDREL-HOLDER DIA. 54 TO 96 MM | |
| H067-03 | MANDREL-HOLDER DIA. 24 TO 50 MM | |
| H067-02 | MANDREL-HOLDER DIA. 15 TO 20 MM | |
| H067-01 | MANDREL-HOLDER DIA. 10 TO 12 MM | |
| H066-01/H066-62 | MANDREL FROM DIA 5 MM TO DIA 40 MM | |
| H065-01 | SAFETY GUARDS | |